Mapping Analog Outputs

In Studio 5000, open the Output_Analog_Custom routine in the Output program of the S88Builder Task.

  1. Output Channel – enter a new rung for each output channel.  Program this rung to move the RSlots[rss].Analog.Ch[p] data into the real channel data as shown in the following image:

2. Repeat step 1 for all channels

3. Example VFD analog output – VFDs have digital and analog signals. The analog outputs must be handled here the same as a normal analog output as shown (the point selection for these signals are defined in the VDF CM options):


Updated on December 6, 2018

Related Articles

Password Protected