Adding a Slot

Each rack may contain up to 100 slots and each slot up to 32 points.

  1. Select the I/O tab and then the Slot sub-tab.
  2. Scroll to the bottom of the table and highlight the empty bottom row.
  3. Enter information for the following items:

Rack – Select the parent rack for the slot.

Module – Choose a compatible module for the type of I/O contained by the slot.

Ordinal – Choose the slot’s position in the rack (first slot is 0).  This must be unique within the rack and less than 100.

Controllers – Select all controllers that will own or monitor this slot.  The first controller chosen is the owner.

Updated on December 6, 2018

Related Articles

Password Protected